210-030 무료 덤프문제 온라인 액세스

You are deploying a Vblock System 340 and must verify the PowerPath license registration. After running
the command rpowermt.exe display dev=all host=host_name, the Windows command line prompts for the
applicable ESXi username and password. After entering the ESXi root username and password, the error
"User Credentials Invalid" is returned in the Windows command line. Attempts to directly connect to the
ESXi host using SSH or the vSphere client using the root username and password are not successful.
What should you do to resolve this problem?

• A.Restart the watchdog service on the ESXi host.
• B.Execute the command again using the Windows credentials.
• C.Restart the rpowermt service on the license server.
• D.Execute the rpowermt.exe register command first.

You are setting up a FAST VP policy in a Vblock System 700. The pool space for each tier is 5 TB EFD,
1 0 TB FC, and 100 TB SAT
The storage group with the FAST policy applied has a total of 10 TB allocated. The FAST policy has a
setting of 10% EFD, 50% FC, and 100% SATA.
According to the FAST policy, how much EFD space is available for use?

• A.0.5 TB
• B.5 TB
• C.11.5 TB
• D.1 TB

During a Vblock System 340 deployment, a customer asks you to change the IP address on both Control
Stations from the original LCS configuration.
Which process accomplishes this?

• A.Failover Storage Processor A, to Storage Processor B, then change the IP address on the primary
  Control Station first, then move to the Secondary, and fail back the secondary.
• B.Failover Storage Processor B, to Storage Processor A, then change the IP address on the primary
  Control Station first, then move to the Secondary, and fail back the secondary.
• C.Change the IP address on the Primary Control Station, verify using specified NAS commands, failover
  the Primary Control Station to the Secondary, and change its IP address and fail back the secondary.
• D.Change the IP address on the Secondary Control Station, verify using specified NAS commands,
  failover the Secondary Control Station to the Primary, and change its IP address and fail back the primary.

Your customer would like to have Windows file shares set up on the VBlock System 720, with a VNX
Gateway attached.
Which GUI tool would you use to set this up?

• A.SMC
• B.Prosphere
• C.Unisphere
• D.VCE Vision

Which Vblock System 340 disk type is used for high performance low latency?

• A.FC
• B.NL-SAS
• C.SAS
• D.EFD