SMI300XE 무료 덤프문제 온라인 액세스

How many GPUs can be missing or undetected by the system to successfully execute the ROCm software commands?

• A.1
• B.None
• C.2
• D.3

What are the 4 key statistical information points to note from the ROCm commands output? Choose 4 answers.

• A.Energy Counter
• B.Temperature
• C.vBios
• D.Power Draw
• E.Firmware Details
• F.Socket Type

The ROCm commands are not providing output or are failing. What could be the primary reason why?
And how can you validate the reasoning?

• A.CPU is not installed correctly on the server. Review the OS dmesg logs for any odd CPU messages, then if located proceed to reseat the CPU.
• B.If more than 3 GPUs are missing, then ROCm commands will not function. We need to verify that the 3 are missing in the IPMI GUI and review the GPU component section to make sure that at least 2 or fewer GPUs are missing.
• C.You suspect there are GPUs not detected. To determine which GPUs are missing, open the IPMI GUI and review the GPU component section to make sure all GPUs are present.
• D.The GPU baseboard may not be detected. You can determine this by opening the IPMI GUI and reviewing the FW section.

What is the correct syntax for the AGFHC command to run recipes?

• A.agfhc.exe -r-s alljvll.yml
• B../agfhc -r alljvll.yml
• C../agchf-r alljvll.yml
• D./agfhc -t -a alljvll.yml

When removing the GPU tray, why is it important that you keep it straight?

• A.Movement can damage the upper portion of the chassis or the fans below the GPU tray.
• B.The GPU tray only slides in or out at a 16-degree angle.
• C.You won't be able to set it on your work surface if you don't.
• D.Because of the screws on either side of the tray.