SDLCSA 무료 덤프문제 온라인 액세스

What safety feature prevents the motherboard tray from being removed too quickly and potentially dropped?

• A.A safety pin
• B.A safety latch
• C.A safety cable
• D.A safety switch

What are the full steps and proper order for replacing a failed power supply unit in the SYS-421GE-TNHR2- LCC system?

• A.Lift the release lever and use it to pull out the failed power supply unit > Replace the failed power supply unit with a new one > Push the new power supply unit into the tray > Push the release lever down and in until it clicks
• B.Lift the yellow lock to unlock the release lever > Lift the release lever and use it to pull out the failed power supply unit > Replace the failed power supply unit with a new one
• C.Lift the blue lock to unlock the release lever > Push the release lever down and in until it clicks > Ensure the red lock on the release lever is locked
• D.Lift the red lock to unlock the release lever > Lift the release lever and use it to pull out the failed power supply unit > Replace the failed power supply unit with a new one > Ensure the gold connector pins are on the top > Push the new power supply unit into the tray > Push the release lever down and in until it clicks > Ensure the red lock on the release lever is locked

How do you access the M.2 drive in the chassis?

• A.The M.2 drive is not accessible at all
• B.By removing the fan housing from the chassis, then removing the air shroud from the fan housing
• C.By removing the motherboard tray from the chassis, then removing the air shroud from the motherboard tray
• D.By removing the GPU tray from the chassis, then removing the air shroud from the GPU tray

To remove an AOC NIC card, simply pull the card straight up. True or False.

• A.True
• B.False

What are the full steps and proper order for removing the motherboard tray from the chassis of the SYS-
421GE-TNHR2-LCC system?

• A.Loosen 12 screws on both ends of the front of the chassis to loosen the latches > Slowly start pulling the tray out > Continue pulling out the tray the rest of the way
• B.Loosen 8 screws on both ends of the front of the chassis to loosen the latches > Continue pulling out the tray the rest of the way
• C.Loosen 2 screws on both ends of the front of the chassis to loosen the latches > Pull down on the latches until the latches release completely > Slowly start pulling the tray out > Release the safety latches on both sides > Lift and move the quick connect cables out of the way > Continue pulling out the tray the rest of the way
• D.Pull down on the latches until the latches release completely > Slowly start pulling the tray out > Release the safety latches on both sides