C-S4CPB-2602 무료 덤프문제 온라인 액세스

See Explanation below for all solution
Explanation:
Objective
The purpose of this task is to assign the Configuration Expert - Data Migration business role to your own user so that you can use the migration cockpit and perform the bank data migration scenario using staging tables.
The required business role is:
Business Role ID: BR_CONFIG_EXPERT_DATA_MIG
Business Role Description: Configuration Expert - Data Migration
Business Scenario Explanation
In this scenario, you are responsible for migrating bank data into SAP S/4HANA Cloud Public Edition.
Because only a few banks need to be loaded, the chosen migration method is:
Migrate Data Using Staging Tables
Before you can use migration apps such as Migrate Your Data, your user must have the correct migration authorization.
That is why this task requires assigning the business role:
Configuration Expert - Data Migration
BR_CONFIG_EXPERT_DATA_MIG
Without this role, you may not be able to:
create migration projects,
open migration objects,
upload staging-table files,
validate and transfer data,
execute mapping tasks,
or run the migration itself.
Important Notes
Always replace ###### with the last 6 digits of your group number in later migration tasks.
Use the exact role ID required by the task:
BR_CONFIG_EXPERT_DATA_MIG
Save the user after role assignment.
Make sure the user is not left only in draft status.
Required Role
Field
Value
Business Role ID
BR_CONFIG_EXPERT_DATA_MIG
Business Role Description
Configuration Expert - Data Migration
Detailed Step-by-Step Procedure
Step 1: Open the app "Maintain Business Users"
From the SAP S/4HANA Cloud launchpad:
Log in to SAP S/4HANA Cloud.
Use the app search.
Search for:
Maintain Business Users
Open the app.
Explanation:
This app is used to assign business roles to business users.
Since the task asks to assign a role to your own user, this is the correct starting point.
Step 2: Search for your own user
Inside Maintain Business Users:
In the search/filter area, enter your own user ID.
Click Go.
Explanation:
You must assign the migration role to your own user because you are the one who will execute the migration tasks.
Step 3: Open your user record
From the search results:
Click your user entry.
Open the business user details page.
Explanation:
This opens the screen where assigned roles can be reviewed and maintained.
Step 4: Switch to Edit mode
On the business user page:
Click Edit
Explanation:
Edit mode is necessary before the Assigned Business Roles list can be changed.
Step 5: Open the "Assigned Business Roles" tab
Inside the business user record:
Click:
Assigned Business Roles
Explanation:
This is the section where the new business role will be assigned.
Step 6: Click Add
In the Assigned Business Roles area:
Click Add
This opens the popup:
Add Business Roles
Explanation:
This popup allows you to search for and assign standard SAP business roles.
Step 7: Search for the migration role
In the Add Business Roles popup:
In the role search field, enter:
BR_CONFIG_EXPERT_DATA_MIG
Click Go
Select:
Configuration Expert - Data Migration
BR_CONFIG_EXPERT_DATA_MIG
Explanation:
This is the exact role required for the bank migration scenario.
Step 8: Add the role
After selecting the role:
Click OK or Apply
Explanation:
This adds the migration role to your user in draft mode.
Step 9: Save the user
Back on the business user page:
Click Save
Explanation:
This finalizes the assignment.
Without saving, the role will not be available for use in the migration tasks.
Step 10: Verify the role assignment
After saving, confirm that your assigned roles list includes:
Configuration Expert - Data Migration
BR_CONFIG_EXPERT_DATA_MIG
Explanation:
This verifies that your user is now authorized to work with migration projects and staging-table migration.
Expected Result
After this task is completed successfully:
your user has the role BR_CONFIG_EXPERT_DATA_MIG,
the role assignment is saved,
your user can proceed with the bank migration project tasks,
migration-related apps are available to your user.

See Explanation below for all solution
Explanation:
Task 8: Create a New Business Role (Not from a Template)
Objective
The purpose of this task is to create a new custom business role for all employees in the organization. This role is intended to become the base role that will later be connected to the required business catalogs, launchpad space, and page so that employees can easily access the relevant apps.
This task explicitly says:
create a new business role
not from a template
use the exact values provided in the task
Business Scenario Explanation
You are building a role for all employees in the organization.
Unlike the earlier project-manager role, this one is not derived from a standard SAP template.
The purpose of this role is to provide a shared employee-level launchpad structure.
Later, the role will be used to:
assign business catalogs,
create a launchpad space,
create a launchpad page,
place apps on the page for employee self-service access.
In this step, the focus is only on creating the new business role with the correct identification and access category settings.
Important Notes
Always replace ###### with the last 6 digits of your group number.
Use the values exactly as shown.
Do not create this role from a template.
The access categories must be set exactly as required:
Unrestricted for all categories
Save the role at the end.
Required Values
Use the following values exactly as shown in the task screenshot

Step 1: Open the app "Maintain Business Roles"
From the SAP S/4HANA Cloud launchpad:
Log in to SAP S/4HANA Cloud.
Use the app search.
Search for:
Maintain Business Roles
Open the app.
Explanation:
This app is used to create, maintain, copy, derive, and restrict business roles.
Since this task requires creating a brand new custom role, this is the correct place to start.
Step 2: Start creating a new business role
Inside Maintain Business Roles:
Click New
Explanation:
This task explicitly says to create a role not from a template.
So you must use New, not:
Create From Template
Create Derived Business Role
Copy
Using New creates a completely customer-defined business role.
Step 3: Enter the business role ID
In the new business role creation screen:
In Business Role ID, enter:
Z_EMPLOYEES_ALL_######
Example
For suffix 000013:
Z_EMPLOYEES_ALL_000013
Explanation:
This is the technical identifier of the new business role.
It must match the task exactly for validation to succeed.
Step 4: Enter the business role description
In Business Role Description, enter:
All Employee Role ######
Example
For suffix 000013:
All Employee Role 000013
Explanation:
This is the readable description shown in SAP and should exactly match the exercise requirement.
Step 5: Set access categories
In the Access Categories section, set all categories to:
Write, Read, Value Help = Unrestricted
Read, Value Help = Unrestricted
Value Help = Unrestricted
Explanation:
The task explicitly says:
Access Categories: Unrestricted for all categories
So all three category dropdowns must be left or set to Unrestricted.
This means:
the role is not restricted by country, company code, or other field-level limitation in this step, this role is intended to be broadly reusable for all employees.
Step 6: Review the role before saving
Before saving, verify:
Business Role ID is correct
Business Role Description is correct
all 3 access category values are Unrestricted
Explanation:
This avoids common mistakes such as:
wrong suffix,
extra spaces,
restricted instead of unrestricted values,
creating from template accidentally.
Step 7: Save the role
Click:
Save
Explanation:
This finalizes the new business role.
Without saving, the role remains only in draft and is not actually created.
Step 8: Verify the role after save
After saving, confirm that the role is displayed with:
Business Role ID = Z_EMPLOYEES_ALL_######
Business Role Description = All Employee Role ######
Write Access / Read Access / Value Help Access = Unrestricted
Explanation:
This is the confirmation that the role was created successfully and matches the task requirement.
Expected Result
After the task is completed successfully:
a new custom business role exists,
it was created not from a template,
the role ID and description match the required values,
all access categories are Unrestricted,
the role is saved and available for the next steps.

See Explanation below for all solution
Explanation:
Objective
The purpose of this task is to assign the required business catalogs to the custom all-employee business role created in the previous task. These catalogs provide the applications that will later be shown in the launchpad space and page for all employees.
The catalogs that must be assigned are:
HCM - Employee Self Service
SAP_HCM_BC_EMP_PC
Concur - Employee Self-Service
SAP_CON_BC_CTE_ESS_PC
Business Scenario Explanation
In the previous task, you created a new custom all-employee business role, for example:
Z_EMPLOYEES_ALL_######
That role exists, but on its own it does not yet provide app access.
In SAP S/4HANA Cloud, app access is granted through business catalogs.
This means the role must now be connected to the catalogs that contain the apps employees need.
Later, these catalogs will feed the launchpad page content so end users can easily find the relevant applications.
Important Notes
Always replace ###### with the last 6 digits of your group number.
Use the exact catalog names and IDs.
Assign both required catalogs.
Save the role after assignment.
Do not assign the wrong catalog variant.
Required Catalogs
Assign exactly these two business catalogs:
Business Catalog
Business Catalog ID
HCM - Employee Self Service
SAP_HCM_BC_EMP_PC
Concur - Employee Self-Service
SAP_CON_BC_CTE_ESS_PC
Detailed Step-by-Step Procedure
Step 1: Open the app "Maintain Business Roles"
From the SAP S/4HANA Cloud launchpad:
Log in to SAP S/4HANA Cloud.
Use the app search.
Search for:
Maintain Business Roles
Open the app.
Explanation:
This app is used to maintain business roles, assign catalogs, assign launchpad spaces, and maintain restrictions.
Step 2: Search for your custom all-employee business role
Inside Maintain Business Roles:
Search for your business role ID:
Z_EMPLOYEES_ALL_######
Example
If your suffix is 000013, search for:
Z_EMPLOYEES_ALL_000013
Open the role.
Explanation:
You must open the custom all-employee role created in the previous task, not a template role and not a standard SAP role.

Step 3: Verify the correct role is open
Confirm that the role details show:
Business Role ID = Z_EMPLOYEES_ALL_######
Business Role Description = All Employee Role ######
Explanation:
This ensures you are assigning catalogs to the correct business role.
Step 4: Go to the "Business Catalogs" tab
Inside the role:
Click the tab:
Business Catalogs
Explanation:
This tab is used to assign the business catalogs that define which apps and app authorizations the role provides.
Step 5: Click Add
In the Assigned Business Catalogs section:
Click Add
This opens the dialog:
Add Business Catalogs
Explanation:
The Add popup is used to search for and assign SAP-delivered business catalogs to the custom role.
Step 6: Search for the first catalog
In the Add Business Catalogs popup:
Search for:
SAP_HCM_BC_EMP_PC
or
HCM - Employee Self Service
Select:
HCM - Employee Self Service
Business Catalog ID: SAP_HCM_BC_EMP_PC
Explanation:
This catalog provides employee self-service apps and is required by the task.

Step 7: Search for the second catalog
Still in the Add Business Catalogs popup:
Search for:
SAP_CON_BC_CTE_ESS_PC
or
Concur - Employee Self-Service
Select:
Concur - Employee Self-Service
Business Catalog ID: SAP_CON_BC_CTE_ESS_PC
Explanation:
This catalog provides the Concur employee self-service content and is also explicitly required by the task.
Step 8: Add the selected catalogs
After selecting both catalogs:
Click OK or Apply
Explanation:
This adds the selected catalogs to the custom role in draft mode.
Step 9: Verify both catalogs are listed
Back in the Business Role screen, verify that both assigned catalogs are visible:
SAP_HCM_BC_EMP_PC
SAP_CON_BC_CTE_ESS_PC
Explanation:
This confirms that the required app authorizations have now been attached to the role.
Step 10: Save the role
Click:
Save
Explanation:
This finalizes the catalog assignment.
Without saving, the catalogs remain only in draft and the role will not provide the required app content.
Step 11: Verify the result after save
After saving, check again that the role still shows both business catalogs in the assigned list.
Explanation:
This confirms the task was completed successfully and the role is ready for the next step, which is launchpad space/page content.
Expected Result
After this task is completed successfully:
the custom all-employee role has both required business catalogs assigned, the role is saved successfully, the role now provides the app authorizations required for employee self-service content, the launchpad page can later use these catalogs to add the required tiles.