1z1-429 무료 덤프문제 온라인 액세스

What step should be performed to receive email notifications from the FS1 system?

• A.Create Primary Administrator.
• B.Configure email notifications routed via an email server.
• C.Configure SNMP on host.
• D.Enable Call-Home feature.

The storage administrator is looking for events with a specific severity. Which three event severities can be filtered for easy searching?

• A.Informational
• B.Critical
• C.Warning
• D.Error
• E.Normal

Which three are functions of the Private Management Interconnections (PMI)?

• A.Write cache mirror path
• B.Cluster Heartbeat (HB) between pilots
• C.RAID controller failover path
• D.Cluster Heartbeat (HB) between controllers
• E.Pilot to controllercommunication

Which two are recommended locations for Pilots and Controllers?

• A.Pilot 1 in RU 23, Pilot 2 in RU 24
• B.Controller 1 in RU 23 and 24, Controller 2 in RU 25 and 26
• C.Controller 1 in RU 19 and 20, Controller 2 in RU 21 and 22
• D.Pilot 1 in RU 21, Pilot 2 in RU 22

Which set of steps is the recommended cabling sequence with FS1-2 hardware components?

• A.1. Controller 1: Install CMA, plug and route cables Power first, Ethernet,SASController
  Interconnects, SAS Controller to Strings and Front End Network Connections respectively.
  2.Controller 2: Same as above.
  3.DEs per string sequence.
  4.Pilot 1: Install CMA, plug al cablesand route them Power first, Ethernet Last.
  5.Pilot 2: Same as above.
• B.1. Controller 1: Install CMA, plug and route cablesPower first, Ethernet, SAS Controller
  Interconnects, SAS Controller to Strings, and Front End Network Connections respectively.
  2.Controller 2: Same as above.
  3.Pilot 1: Install CMA, plug all cables, and route them Power first, Ethernet last.
  4.Pilot 2: Same as above.
  5. DEs per string sequence.
• C.1. Pilot 1: Install CMA, plug all cables, and route them Power first, Ethernet Last.
  2.Pilot 2: Same as above.
  3.Controller 1: Install CMA, plug and route cables Power first, Ethernet, SAS Controller
  Interconnects, SAS Controller to Strings and Front End Network Connections respectively.
  4.Controller 2: Same as above.
  5.DEs per string sequence.
• D.1. Pilot 1: Install CMA, plug all cables,and route them Power first, Ethernet last.
  2.Pilot 2: Same as above.
  3.DEs per string sequence.
  4.Controller 1: Install CMA, plug and route cables Power first, Ethernet, SAS Controller
  Interconnects, SAS Controller to Strings, and Front End Network Connections respectively.
  5.Controller 2: Same as above.