NS0-507 무료 덤프문제 온라인 액세스

You are configuring a Fibre Channel SAN in your cluster for the first time.
In this scenario, which switch feature is required for ONTAP Fibre Channel SAN to operate correctly?

• A.N_Port ID Virtualization (NPIV)
• B.Dynamic Path Selection (DPS)
• C.Forward Error Correction (FEC)
• D.iSCSI Type, Length, Value (TLV)

Referring to the exhibit, you see an FC SAN configuration that uses multiple fabrics and the best practice Implementation.
How many paths per LUN do you expect the host to see if the cable 0c connecting controller 2 to fabric 1 is pulled out for connectivity redundancy testing?

• A.6
• B.12
• C.7
• D.14

You have a host with multiple initiator ports attaching to a single SAN LIF.
With this setup, which action is required?

• A.You must use a SAN LIF failover group.
• B.You must use host multipathing software.
• C.You must use an individual SAN LIF for each initiator port.
• D.You must use a portset.

You notice that reporting nodes are not mapped on a LUN in a 4-node cluster that originally ran an older version of ONTAP. In this scenario, which command would you use to add only the local HA pair to the reporting nodes for the /vol/data/lun1/LUN?

• A.Lun mapping add-reporting-nodes -vserver svm1 -path /vol/data/lun1 -igroup igroup1 destination-aggregate data
• B.Lun mapping add-reporting-nodes -vserver svm1 -path /vol/data/lun1 -igroup igroup1-local nodes true
• C.Lun mapping add-reporting-nodes -vserser svm1 -path /vol/data/lun1 -igroup igroup1 destination-volume cl01_01_aggr1
• D.Lun mapping add-reporting-nodes -path /vol/data/lun1 -igroup igroup1 -all false

To provide host connectivity for both SAN and NAS protocols, which combination is valid?

• A.UTA2 configured as FCoE connected to a FCoE-enabled switch with FC HBAs in the host
• B.UTA2 connected to an FCoE-enabled switch with CNAs in the host
• C.UTA2 configured as 10Gb Ethernet connected to an Ethernet switch with CNAs in the host
• D.UTA2 configured as FC connected to an FCoE-enabled switch with CNAs in the host