70-582 무료 덤프문제 온라인 액세스

You are developing a Windows Embedded Standard 7 image for a customer. You need to replace
the
Windows Embedded
Standard 7 startup screen
with the
customers
branded screen. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

• A.Add the Unbranded Startup Screens package.
• B.Use the Notepad.exe tool to edit the Boot.ini file.
• C.Add the Shell Foundation package.
• D.Place the customers bitmap file in the SOEMS folder.
• E.Place the customers bitmap file in the answer file.
• F.Use the BCDEdit tool.

You are developing a Windows Embedded Standard 7 image for 50 target devices. Each device will use a different type of plug-and-play printer. You need to ensure that the final image contains only the driver for the type of plug-and-play printer attached to the device. What should you do?

• A.Run the Sysprep /audit /reboot command on the image. Install all given plug-and-play printer drivers. Run the Sysprep /generalize/oobe /shutdown command. Capture and deploy the image. Attach the plug-and-play printer to the device before the image is installed to the device.
• B.Add a synchronous command that invokes the DPInst.exe tool during the auditUser pass to install the driver for the plug-and-play printer attached to the device. B.Create
  an answer
  file
  and set Windows
  Embedded/PnPCustomizationsWinPE
  for the DriverPaths element
  to the share location of the driver files.
  Run the Sysprep /unattend:"answerfile.xml" command.Restart the device.
• C.Create an answer file along with the Windows Embedded/PnPSysprep setting for the PersistAIIDevicelnstalls option set to TRUE. Allow the plug-andplay manager to install the plug-and- play printer driver.Restart the device.

You are deploying a final and resealed Windows Embedded Standard 7 Windows Image (WIM) to multiple target devices over the network. You need to deploy the WIM image to the target devices from a server in the network. You PXE boot the target devices from the network. Which software should you install on the server that will be used to deploy the image?

• A.Windows Management Instrumentation (WMI)
• B.System Center Configuration Manager (SCCM)
• C.Windows Server Update Service (WSUS)
• D.Windows Update Standalone Installer (WUSI)

You are creating a Windows Embedded Standard 7 image for a target device. You plan to use a new hardware platform for the device. You need to import the devices hardware information into Image Configuration Editor (ICE). You also need to minimize the amount of information you are importing. What should you do?

• A.Start the target device by using WindowsPE and execute the TAP.exe tool.
• B.Start the target device by using WindowsPE and execute the lmageX.exe tool.
• C.Start the target device with retail Windows and execute the lmageX.exe tool.
• D.Start the target device with MS-DOS and execute the TAP.exe tool.

You are developing a Windows Embedded Standard 7 image for a target device. You have 32-bit drivers for all hardware components of the device, except for one component that has a 32-bit driver and a 64-bit driver. You need to ensure that the image will support the drivers for all the components on the device. What should you do?

• A.Add a new OEMFoldersPath entry to EmbeddedEdition_x86. Configure the settings of the entry to point to the drivers. Use the Select Distribution Share option to select an x64 distribution share.
• B.Add a new OEMFoldersPath entry to EmbeddedEdition_x86. Configure the settings of the entry to point to the drivers. Use the Select Distribution Share option to select an x86 distribution share.
• C.Use the 32-bit driver for the component. Use the Select Distribution Share option to select an x86 distribution share.
• D.Use the 64-bit driver for the component. Use the Select Distribution Share option to select an x64 distribution share.