H12-323_V2.0 무료 덤프문제 온라인 액세스

In medium and large enterprise networks, different SSIDs are generally used to distinguish the audiences because of the different audiences using wireless networks. When planning the network, different SSIDs under different AP groups can be configured with different service VLANs, but different SSIDs in the same AP group must use the same service VLAN.

• A.True
• B.False

An engineer is deploying a wireless network at a customer site. The customer requires the wireless controller to use dual-link hot standby networking. During the configuration process, the engineer found that dual links could not be established between the active and standby WACs.
Which of the following situations may be the cause of this problem? (Multiple choice)

• A.The dual-link switch on the standby WAC is not turned on
• B.The IP address of protect-ac is not configured on the standby WAC
• C.The standby WAC IP address is not configured on the primary WAC or the configured IP address is inconsistent with the standby WAC IP address
• D.When the AP selects WAC, the main WAC has not started normally

CampusInsight protocol playback function, for wireless users, performs protocol playback in the three stages of association, authentication, and ().

When using the AP calculator in the CloudCampus app to quickly calculate the number of APs in a mobile office scenario, which of the following parameters should be entered based on actual conditions? (Multiple choice)

• A.AP Concurrency Rate
• B.Single-user bandwidth requirements
• C.Deployment area
• D.Number of rooms

Which of the following descriptions of AC deployment methods is correct? (Multiple choice)

• A.Side-mounted networking is an existing network overlay method, which requires less modification to the existing network and is quick and convenient to deploy. In addition, direct forwarding or tunnel forwarding mode can be selected according to the control requirements for wireless users.
• B.AC deployment can be divided into two types: side-mounted deployment and direct-connected deployment.
• C.Direct connection is mainly used in large campus network scenarios. The recommended number of APs in the network is more than 1,000.
• D.In the direct connection deployment mode, because the AC is connected in series in the network, the management data and user data between the AP and AC must be forwarded through the CAPWAP tunnel.