HPE7-A08 무료 덤프문제 온라인 액세스

You are configuring OSPF between two CX switches but cannot see any neighbors. Based on the output, how would you fix the problem?

• A.Remove the max-metric router-lsa on-startup to allow faster formation of adjacency.
• B.Configure no ip ospf cost 100 on the VLAN 182 interface.
• C.Configure ip ospf network broadcast on the VLAN 182 interface.
• D.Configure no passive-interface vlan182 on the switch.

You would like to receive a monthly report tracking your available HPE Aruba Networking Central licenses and their expiration dates. Which report should you schedule?

• A.Network
• B.Infra Inventory
• C.Switch Capacity Planning
• D.Resource Utilization

Your customer's CX switches are managed in HPE Aruba Networking Central. If a VSX primary switch is accidentally powered off, which alert will be triggered?

• A.Switch Reboot
• B.Switch STP Root Change
• C.Switch Disconnected
• D.Switch Stack Conductor Change

You need to run a packet capture on a CX switch and be able to view the full output on a remote device in real-time. What is the best way to do this?

• A.Configure a mirror session to the CPU, use tshark to capture it to a PCAP file
• B.Inspect the summary of the packets in real time on the switch using tcpdump
• C.Configure a mirror session with another port on the switch as the destination
• D.Configure a mirror session using ERSPAN to a computer running Wireshark

An administrator has an AOS-CX switch configured with:
router ospf 1
area 0
area 1 stub no-summary
It is the only ABR for area 1. The switch has the appropriate adjacencies to routing switches in areas 0 and 1. The current routes in each area are:
Area 0: 5 routes (LSA Type 1 and 2)
Area 1: 10 routes (LSA Type 1 and 2)
External routes: 2 (LSA Type 5)
Based on the above configuration, how many OSPF routes will routing switches see in Area 1?

• A.11
• B.6
• C.15
• D.12