HPE7-A07 무료 덤프문제 온라인 액세스

You are troubleshooting a WLAN deployment with APs and gateways set up with an 802.1X tunneled SSIO.
End-users are complaining that they can't connect to die enterprise SSID. Which possible AP tunnel states could be the cause of the Issue? (Select two.)

• A.SM_STATE_SURVIVING
• B.SM_STATE_CONNECTED
• C.SM_STATE_SURVIVED
• D.SM_STATE_CONNECTING
• E.SM_STATE_RE KEYING

An AOS-10 multi-site deployment has sites with AP-only bridged SSIDs and other sites with APs and gateways operating tunneled SSIDs. Client session state sync errors exist between secure lab environments and public-facing areas at several sites.
What is causing the issues?

• A.The affected clients are associated with an SSID with 11r and 11k disabled.
• B.The sites with issues are the overlay AP with gateway sites because the connection to HPE Aruba Networking Central is interrupted.
• C.The sites with issues are the AP-only deployments because the connection to HPE Aruba Networking Central is interrupted.
• D.The DTLS connections are down between APs in the lab and APs in public areas.

Your customer recently decided to build a new wireless network based on AOS-10. The following legacy settings still exist:
* The DHCP server still sends option 60 "ArubaInstantAP" and option 43 including the IP address of the AirWave server in the ZTP VLAN.
* The DNS server has an entry for "aruba-airwave" pointing to the AirWave server.
The customer purchased new AP-655 access points and HPE Aruba Networking Central subscriptions.
Each AP is assigned to the "ACX-Group" in the Device Pre-provisioning section of Central, and the external firewall allows HTTPS traffic between APs and the Internet.
What will happen when the new factory default APs are connected to the customer's network for the first time?

• A.The new APs will contact the cloud and will be pointed to the IP address of AirWave
• B.The new APs will contact the IP address of AirWave learned from the DNS entry "aruba-airwave"
• C.The new APs will contact the IP address of AirWave from DHCP option 43
• D.The new APs will contact the cloud and get the "ACX-Group" configuration in HPE Aruba Networking Central

The wireless administrator for a college campus is gelling reports of connectivity issues when students are working outdoors.

Reviewing the settings above, watch change is needed to align with best practices?

• A.Disable 802 11k.
• B.increase 5 GHz wireless coverage tuning to Aggressive.
• C.Disable 802 11r.
• D.increase 5Gnz TX power range Min/Max.

A customer has deployed an AOS 10 mobility gateway cluster consisting of three controllers at a single site The WLAN is configured to tunnel wireless device traffic to the AOS 10 mobility cluster. The clients are authorized to use WPA2-Personal. An end-user has opened a ticket with the helpdesk stating they cannot connect their client device to the network. There are other devices currently associated with the SSID with no issues.

Reviewing the output, what Is the issue?

• A.The client device has an invalid pre-shared key.
• B.transition mode is not enabled
• C.The client device has an invalid certificate
• D.The RADIUS response from the authentication server is