HPE7-A02 무료 덤프문제 온라인 액세스

A ClearPass Policy Manager (CPPM) service includes these settings:
Role Mapping Policy:
Evaluate: Select first
Rule 1 conditions:
Authorization:AD:Groups EQUALS Managers
Authentication:TEAP-Method-1-Status EQUALS Success
Rule 1 role: manager
Rule 2 conditions:
Authentication:TEAP-Method-1-Status EQUALS Success
Rule 2 role: domain-comp
Default role: [Other]
Enforcement Policy:
Evaluate: Select first
Rule 1 conditions:
Tips Role EQUALS manager AND Tips Role EQUALS domain-comp Rule 1 profile list: domain- manager Rule 2 conditions:
Tips Role EQUALS manager
Rule 2 profile list: manager-only
Rule 3 conditions:
Tips Role EQUALS domain-comp
Rule 3 profile list: domain-only
Default profile: [Deny access]
A client is authenticated by the service. CPPM collects attributes indicating that the user is in the Contractors group, and the client passed both TEAP methods.
Which enforcement policy will be applied?

• A.[Deny Access Profile]
• B.manager-only
• C.domain-manager
• D.domain-only

A company has several use cases for using its AOS-CX switches' HPE Aruba Networking Network Analytics Engine (NAE).
What is one guideline to keep in mind as you plan?

• A.When you use custom scripts, you can create as many agents from each script as you want.
• B.The switch will permit you to deploy as many NAE agents as you want, but they might degrade the switch functionality.
• C.You can install multiple scripts on a switch, but you can deploy only one agent per script.
• D.Each switch model has a maximum number of supported monitors, and one agent might have multiple monitors.

You are setting up user-based tunneling (UBT) between access layer AOS-CX switches and AOS-10 gateways. You have selected reserved (local) VLAN mode. Tunneled devices include IoT devices, which should be assigned to:
Roles: iot on the switches and iot-wired on the gateways VLAN: 64, for which the gateways route traffic.
IoT devices connect to the access layer switches' edge ports, and the access layer switches reach the gateways on their uplinks.
Where must you configure VLAN 64?

• A.In the iot-wired role and on no physical interfaces
• B.In the iot role and the access switch uplinks
• C.In the iot role and the iot-wired role and on no physical interfaces
• D.In the iot-wired role and the access switch uplinks

A company wants to turn on Wireless IDS/IPS infrastructure and client detection at the high level on HPE Aruba Networking APs. The company does not want to enable any prevention settings.
What should you explain about HPE Aruba Networking recommendations?

• A.HPE Aruba Networking recommends disabling client detection when you configure infrastructure detection at high, as infrastructure detection includes all the client checks and more.
• B.HPE Aruba Networking recommends turning on both wired and wireless prevention whenever you enable detection at high.
• C.HPE Aruba Networking recommends using hybrid AP mode, as opposed to Air Monitors (AMs), when implementing detection without prevention.
• D.HPE Aruba Networking recommends configuring infrastructure and client detection at a custom level and disabling or tuning some of the settings that are likely to produce false positives.

Refer to the Exhibit. These packets have been captured from VLAN 10. which supports clients that receive their IP addresses with DHCP.

What can you interpret from the packets that you see here? These packets have been captured from VLAN 10, which supports clients that receive their IP addresses with DHCP. What can you interpret from the packets that you see here?

• A.An admin has likely misconfigured two clients to use the same DHCP settings.
• B.Someone is possibly implementing an ARP poisoning and MITM attack.
• C.The mirroring session that captured the packets was likely misconfigured and captured duplicate traffic.
• D.Someone is possibly implementing a MAC spoofing attack to gain unauthorized access.