HPE6-A75 무료 덤프문제 온라인 액세스

An administrator mistakenly configures the wrong VLAN setting on a managed controller's interface. This causes the controller to lose management access to the Mobility Master (MM).
Which mechanism will then attempt to restore the previous working configuration on the managed controller?

• A.restore config
• B.auto-rollback
• C.disaster recovery
• D.bulk configuration

An AOS-Switch enforces 802.1X authentication to an Aruba ClearPass server. A user connects but cannot receive network access, even though the ClearPass administrator finds an Access- Accept for the user on this switch. The switch administrator suspects that there is an issue with the dynamic settings returned by ClearPass.
Where should the administrator look for information about these settings?

• A.in the running-config for the interface
• B.in the interface statistics
• C.in the details for port-access clients
• D.in the detailed RADIUS server statistics

What is true about clustering and AP connections to cluster members?

• A.The AP will always stay connected to the LMS IP address configured in the AP profile.
• B.AP load balancing is disabled by default.
• C.During rebalancing, the active load is redistributed first.
• D.The default thresholds are 75% for the Rebalanced Threshold and 25% for the Unbalanced Threshold.

Refer to the exhibit.

A known unicast packet is received from Switch-1 on the standby and must be forwarded to Switch-2. How does the VSF fabric decide which port in the aggregated (ink should forward the packet?

• A.The standby uses its own port in the link aggregation to forward the fabric.
• B.The standby sends the packet to the commander over a VSF link, and the commander decides the correct port.
• C.The standby uses the typical load sharing algorithm, and it might select either its port or the commander's port.
• D.The standby selects the port on the designated forwarder for the aggregation.

An administrator wants to implement bandwidth limits for guest users to restrict their Internet usage. On the Mobility Master (MM), where would the administrator define these limits?

• A.Firewall policy
• B.AAA policy
• C.802.1X policy
• D.User role