HPE2-Z39 무료 덤프문제 온라인 액세스

An Aruba Instant cluster is added in Aruba AirWave.
A network administrator needs to change the cluster management level to Manage Read Write.
The exhibit shows the current status for the cluster.
What should the administrator do before changing the management level?

• A.Check the cluster SNMP credentials and resolve the mismatch between the cluster credentials and AirWave credentials.
• B.Verify that the cluster is configured with the same shared key that is configured in the global AirWave settings.
• C.Investigate why the cluster configuration does not match the group configuration template and resolve any issues.
• D.Determine why AirWave cannot contact the cluster and resolve any connectivity issues in the network.

On an ArubaOS switch, what is the difference between an SNMPv2c community with manager unrestricted rights and an SNMPv2 community with operator unrestricted rights?

• A.The manager unrestricted community has read-write access to all managed objects on the switch; the operator unrestricted community has read-write access to some objects but not to any Config objects.
• B.The manager unrestricted community uses the Telnet/SSH password assigned to the manager to authenticate SNMP servers: the operator unrestricted community uses the
  Telnet/SSH password assigned to the operator.
• C.The manager unrestricted community has read-write access to the switch, but the operator unrestricted community has read-only access.
• D.The manager unrestricted community uses encryption, but the operator unrestricted community uses plaintext communication

The switches in the exhibit use RSTP The network administrator needs to add Link 2.
Why should the administrator configure Links 1 and 2 as a link aggregation?

• A.to automatically apply the settings already configured for Link 1 to Link 2
• B.to combine traffic statistics for the interfaces
• C.to prevent a loop from occurring
• D.to share traffic more evenly over both links

All switches are ArubaOS switches that currently have the default spanning tree priority.
Switch-1 should be the root of the spanning tree If Switch-1 fails. Switch-2 should become root.
Which configuration for spanning tree priorities ensures this behavior?

• A.priority 15 on Switch-1 and priority 14 on Switch-2
• B.priority 15 on Switch-1 and priority 9 on Switch-2
• C.priority 0 on Switch-1 and priority 15 on Switch-2
• D.priority 0 on Switch-1 and priority 1 on Switch-2

What is a best practice for an MSTP region?

• A.The config name should contain the hostname of the root switch.
• B.The desired root for the CIST should have a lower config revision than any other switch.
• C.Switch-to-switch links should carry all VLANs in use in the MSTP region.
• D.A switch should have a consistent spanning tree priority in each MSTP instance