HPE0-Y53 무료 덤프문제 온라인 액세스

A network administrator establishes an IRF device that consists of two HP 12500 Switch Series switches. The administrator creates a new MDC, MDC2. The administrator assigns physical interfaces on both 12500 switches to MDC2.
Which additional step must the administrator take to ensure that the IRF virtual device property supports MDC2?

• A.Set up an additional IRF link that uses ports assigned to MDC2.
• B.Configure the IRF domain ID within MDC2 with the same ID configured in the Admin MD
• C.Assign each switch a unique IRF member ID within MDC2.
• D.Enable IRF functions on the modules that are assigned to MDC2.

Refer to Exhibit:

A network administrator wants to use Application TLVs to communicate application priority information to a Converged Network Adaptor (CNA). The administrator has configured the QoS policy shown in the exhibit for this purpose and applied the policy outbound to the interface connected to the CAN. The solution is not working correctly.
What must be corrected?

• A.The QoS policy classifier statement must have its mode set to DCBX.
• B.The policy must be applied inbound to the interface.
• C.The application TLVs must be enabled on the interface.
• D.The ACL referenced in the traffic classifier must select traffic by UDP source port.

Refer to Exhibit:

A network administrator wants to route all external traffic from VPN instances "TenantA" and "TenantETto a firewall at 10.0.5.5 in VPN instance "SharedServices." In addition to setting up the routes between the instances, what is another requirement for this scenario?

• A.A router must implement Network Address Translation (NAT) to translate overlapping tenant network addresses.
• B.The routes must be redistributed between the different VPN instances.
• C.Route leaking must be enabled globally on Router1, as well as on each of the VPN instances.
• D.The RAGG 3 interface must be added to VPN instances "TenantA" and "TenantB."

What is a benefit of using the HP Network Visualizer SDN application for capturing traffic on HP Provision switches?

• A.This application can integrate with VMware vCenter, which uses the captured traffic to determine the correct policies to deploy to virtual hosts.
• B.This application can configure mirroring on switches that do not support OpenFlow using traditional methods, eliminating the needs for upgrades.
• C.This application can correlate captured traffic with user information based on information synced with Microsoft Active Directory.
• D.This application can forward the captured traffic to HP DVLabs for deeper inspection as to whether the traffic poses a threat to the network.

An SDN application submits a username and password to authenticate to the HP VAN SDN Controller, which is configured for local authentication. If the username and password are valid, what does the controller do?

• A.forwards the application an Access-Accept packet
• B.requests the last valid token the application used
• C.sends the application an X-Auth-Token
• D.creates a security hash, which the application uses to generate a valid X-Auth-Token