HP2-Z32 무료 덤프문제 온라인 액세스

The Use Controller for Access Control option is selected of a VSC that is defined on an HP MSM Controller.
The VSC enforces MAC-Auth to an external RADIUS server and also users a wireless MAC filter Allow list. A client attempts to connect to the WLAN associated with this VSC its MAC address is defined ass allowed on the external RADIUS server but is not listed on the VSC's Wireless MAC filter Allow list.
What happens when the client attempts to connect?

• A.The client can connect and forward traffic and no errors are logged.
• B.The client can connect and forward traffic but an error is logged on the controller.
• C.The client can connect but can only forward traffic to devices on the wireless MAC filter allow list.
• D.The client cannot connect or forward traffic.

A company has an MSM765 zl Controller that is managing more than one hundred APs. To increase redundancy, the company is adding another MSM765 zl Controller, which will form a team with the first. The controller currently supports an access-controlled VSC for guests. It assigns IP addresses to guest clients, directs the clients to its local web pages, and authenticates the guests to a local user account. Which aspect of this solution should the network administrator change in order implement teaming?

• A.Controllers should use DHCP relay instead of assigning IP addresses to clients.
• B.Controllers should now direct guests to pages on an external web server.
• C.Controllers should use non-access-controlled VSCs with the guest login pages.
• D.Controllers should now authenticate guests to an external RADIUS server.

Refer to the exhibit.
A network administrator needs to configure a dynamic wireless mesh to connect HP MSM
AP 1 to the network.
AP 1 will be installed outdoors where Ethernet is not available. It will connect to AP2ortoAP3; one of which will provide the primary link and one of which will act as backup. Both AP 2 and AP 3 have connections to the Ethernet network and should not connect to each other.
What are appropriate roles for the three APs?

• A.1 = Slave; 2 = Alternate master; 3 = Alternate master
• B.1 = Slave; 2 = Master 3 = Alternate master
• C.1 = Alternate master; 2 = Alternate master; 3 = Alternate master
• D.1 = Slave; 2 = Master; 3 = Master

The MSM APs are deployed on a separate subnet from the controller and network administrators want to set up Layer 3 DHCP discovery.
How will the MSM APs find the MSM Controller?

• A.The MSM Controller sends unicast messages to the MSM APs.
• B.Once the APs receive an IP address from the DHCP server, they broadcast UDP discovery messages.
• C.A vendor option in the DHCP scope lists one or more controller IP addresses.
• D.The MSM Controller is configured as the MSM APs' default gateway, allowing APs to send a discovery request to the MSM Controller

When is AP Provisioning required before deploying controlled APs in a simple network topology?

• A.Discovery of third-party access points
• B.When an AP needs to be deployed with dynamic IP addressing
• C.When you have Layer 2 connectivity to a controller
• D.When using a Local Mesh to connect to the network
• E.When the access point is using a Group other than the Default Group