HP2-T28 무료 덤프문제 온라인 액세스

Which three actions can be taken from the Onboard Administrator (OA) First Time Setup Wizard? (Select three.)

• A.create local user accounts
• B.set the lockout PIN
• C.initial server profile configuration
• D.enclosure bay IP addressing
• E.configure SNMP settings
• F.activate Single Sign-On use

Why does HP recommend installing identical interconnects in horizontal c7000 interconnect bay pairs?

• A.The interconnects provide twice the uplink capacity of an unmatched pair.
• B.The interconnects double the download speed of incoming network traffic.
• C.The interconnects are hard-wired to transfer signals between them for redundancy.
• D.The interconnects provide each server blade with four dedicated high-speed signal pins

You need to place a Type A mezzanine card in an HP ProLiant BL460c Gen8 server blade The server blade is installed in an HP BladeSystem c7000 enclosure that has a pair of FlexFabric interconnects in bays 1 and 2, and a pair of Flex-10 interconnects in bays 5 and 6 The server network path must map to port 11 on the Flex-10 interconnects.
Which mezzanine slot and server bay should you use to install the mezzanine card?

• A.slot 1, bay 3
• B.slot 2, bay 3
• C.slot 1, bay 11
• D.slot 2, bay 11

You are adding a second Onboard Administrator (OA) module that has a firmware version that is different from the first OA module in the enclosure. Both modules are the original style of OA hardware. How can you synchronize the OA firmware?

• A.from the CLI, using a firmware image
• B.from the OA GUI, using a firmware image
• C.from the Smart Update Manager
• D.from the enclosure Insight Display

An HP BladeSystem c7000 enclosure has a full-height server blade in an odd-numbered slot.
Which position has an active crosslink for the partner blade to function correctly?

• A.upper adjacent and to the left
• B.upper adjacent and to the right
• C.lower adjacent and to the right
• D.lower adjacent and to the left