HP2-T16 무료 덤프문제 온라인 액세스

You have a disk enclosure with 14 x 72GB Wide-Ultra2 SCSI hard disks connected.
You add an additional disk enclosure with 8 x 146GB Hot-Pluggable Ultra320 SCSI hard disks to an array controller. To optimize peformance, you move 3 x 72GB Ultra2 hard disks to a new enclosure to balance the number of hard disks across two channels.
The disks in the new enclosure are not working correctly and the disks are not seen in the array controller management tool.
There are no conflicting device IDs and termination is correct. All enclosures were
pwoered on before powering up the server.
What are the possible causes of the problem? (Select two)

• A.You must update the SCSI Controller BIOS to the latest supported revision.
• B.The SCSI I/O module on the disk enclosure is faulty.
• C.The number of disks exceeds the capability of the controller.
• D.Ultra320 SCSI devices cannot be mixed with Wide-Ultra2 SCSI devices.
• E.The cables and/or connectors are faulty or not properly seated.

What is problematic for a data center? (Select two.)

• A.carbon dioxide fire suppression system
• B.inline UPS
• C.separate console room for KVM stations
• D.high humidity
• E.low humidity

Your customer's workstation has four 15K rpm SAS drives.
The customer wants the best possible performance, and is not concerned about data loss.
Which RAID level best meets this customer's needs?

• A.RAID 0
• B.RAID 5
• C.RAID 6
• D.RAID 1

What is the software abstraction layer instance commonly called?

• A.partition
• B.guest
• C.hypervisor
• D.mirror

What are recommended procedures to ensure backup media is securely stored? (Select two)

• A.Have a bonded third-party firm store backup media at a secure remote facility
• B.Take a copy of all backup media home.
• C.Store a copy of all backup media in a locked server rack.
• D.Ensure the switch on backup tapes is set to lock.
• E.Place the backup media in a fire-proof safe.