HP2-H27 무료 덤프문제 온라인 액세스

How can you determine if an inaccessible drive is enabled?

• A.Download HP Drive Diagnostic Utility onto a USB thumb drive, and run Drive Check.
• B.Replace the storage device with a verified working device. If it works, the drive is enabled.
• C.Press F10 during start-up to access the BIOS, and ensure that the port or device is enabled
• D.Press F8 during start up to access safe mode, and run diagnostics.

What can result from a computer losing power during a BIOS upgrade if the computer does not have a FailSafe Boot Block?

• A.The computer reverts to the earlier version of BIOS because HP BIOS updates are fully redundant and include built-in backup and restore in case of power loss during upgrade.
• B.The system memory can become corrupt requiring replacement of the memory.
• C.The update fails, but HP BIOS updates can always be re-run to return the computer to a working state even if power is lost during a BIOS update.
• D.The system ROM can become corrupt causing the system board to fail requiring replacement of the system board.

Why is an antistatic mat important for controlling electrostatic discharge? (Select two.)

• A.drains power quickly with a surface that provides real ground potential with a very low electrical impedance.
• B.provides a soft surface to prevent scratches on the case or outer shell of the computer.
• C.provides a dissipative connection for a wrist strap that must be worn by the service technician.
• D.provides electrostatic protection for sensitive equipment without requiring the mat to be connected to a ground.
• E.provides a surface that gradually bleeds electrical energy instead of collapsing to real ground potential.

A customer has purchased the HP EliteBook 8560w notebook because he needs to use the biometric features to secure his top secret data. What HP Protect Tools module should the customer use to manage the biometric security on his notebook? Select the correct answer,

• A.Password Manager
• B.Embedded Security
• C.Credential Manager
• D.BIOS configuration

Which disclosure level is specified in EF0012J according to the support communication code for indicating audiences?

• A.E is for engineering specifying that this communication is HP confidential and limited to HP (badged) employees.
• B.The E is for external partners specifying that this communication is restricted from the general public and end users but is available to all external HP partners.
• C.E is for enterprise specifying that this communication is available to enterprise-level customers (major accounts), enterprise-level service providers, HP employees, and channel partners.
• D.E is for everyone specifying that this communication is available to the general public and end users.