HP0-Y52 무료 덤프문제 온라인 액세스

Refer to the exhibit.

Which endpoint or endpoints receive broadcast ARP requests sent by EndpointA?

• A.EndpointB, EndpointC, and EndpointD
• B.EndpointB only
• C.EendpointB and EndpointC only
• D.EndpointC only

A network administrator configures this command on an HP ProVision switch:
vlan 30 ip helper-address 10.0.3.253
The switch is able to ping 10.0.3.253. After the administrator configures the command, users in VLAN 30 report that their PCs fall to acquire addresses using DHCP.
What should the administrator ensure?

• A.that the switch has DHCP relay functions enabled
• B.that the switch is configured with a dynamic IP routing protocol
• C.that the switch has an IP address on VLAN 30
• D.that the switch has DHCP server functions enabled

Which credential is required to validate SNMPv2c write requests?

• A.MD5 authkey
• B.AAA authentication
• C.Scheme
• D.Community string

Refer to the Exhibit.
Exhibit: HP Comware switch configuration.
[Comware] vlan 100 [Comware-vlan100] quit [Comware] vlan 200 [Comware-vlan200] quit [Comware] interface g1/0/22 [Comware-GigabitEthernet1/0/22] port link-type trunk [Comware-GigabitEthernet1/0/22] port trunk permit vlan 100 200 [Comware-GigabitEthernet1/0/22] quit
A network administrator configures the Comware switch, as shown in the exhibit. The network administrator then connects a cable from the Comware's g1/0/22 interface to port 5 on an HP ProVision switch. Which configuration will successfully establish connection for VLAN 1, 100, and 200 between the two switches?

• A.ProVision (config) # vlan 100 ProVision (config) # vlan 200 ProVision (config) # interface 5 tagged 100 200
• B.ProVision (config) # vlan 100 ProVision (config) # vlan 200 ProVision (config) # vlan 100 tagged 5 ProVision (config) # vlan 200 tagged 5
• C.ProVision (config) # vlan 100 200 ProVision (config) # vlan 100 200 tagged 5
• D.ProVision (config) # vlan 100 ProVision (config) # vlan 200 ProVision (config) # interface 5 tagged 100 ProVision (config) # interface 5 tagged 200

What is the maximum number of active links supported between a device and HP ProVision switches when distributed trunking is used to connect the device to the ProVision switches?

• A.Eight
• B.Two
• C.Six
• D.Four