HP0-J64 무료 덤프문제 온라인 액세스

Your customer has been working with a member of your technical team to size a new HP StoreOnce Backup System in an HP Data Protetor 7 environment. The engineer is out of the office but provides you with the report that they generated from the HP Storage Sizing Tool.

Which planning and configuration guideline has to be adhered to so this StoreOnce B6200 Backup System works as desired?

• A.Source Side Deduplication in Data Protector is disabled.
• B.The usage of VTLs and shares is avoided.
• C.A catalyst license is configured per node.
• D.An adequate number of streams are configured.

What is the minimum number of nodes a new storage solution should have to support Network RAID 10+1?

• A.3
• B.2
• C.4
• D.5

You are designing an HP 3PAR StoreServ 7000 solution for an enterprise customer with a broad spectrum of UNIX server and Brocade switch technologies.
Many applications are supported on older hosts that have been in production for many years. There are concerns with current operating system level and firmware levels.
Which approach should you use to provide upgrade information to the customer?

• A.Utilize HP 3 PAR Host Explorer to verify current host configuration compliance specifications
• B.Collect sample server and SAN information and build a configuration report with HP Single Point of Configuration Knowledge (SPOCK) that depicts minimal supported release levels.
• C.Configure the array with an earlier release of the HP 3PAR InForm OS to ensure compliance in older enterprise environments.
• D.Provide the customer with access to Product QuickSpecs and the HP SAN Design Guide to assist with verifying integration compliance

During a customer proposal meeting for a 900 TB HP 3PAR StoreServ 10800, you discover an opportunity to address the lack of disaster recovery for two very critical applications that both require approximately 90 TB of usable storage each. The customer is considering a competitive disaster recovery (DR) solution to meet this requirement in a more cost-efficient manner than a second array.
Which HP 3PAR StoreServ architectural feature should you position to address this customer need?

• A.Specify an HP 3PAR StoreServ Synchronous Long Distance configuration utilizing an HP 3PAR StoreServ 7200 synchronous configuration for the best possible RPO and RTO.
• B.Propose a second HP 3PAR StoreServ 10400 with a 250 TB replication license to cost-effectively meet the disaster recovery (DR) requirement.
• C.Highlight the benefits of the HP 3PAR unified architecture and propose a minimally-configured HP 3PAR StoreServ 7200 to provide a cost-effective disaster recovery (DR) solution.
• D.Propose an HP 3PAR StoreServ solution that highlights the benefits of duplicated storage.

A company's Leas SAN Architect considers HP 3PAR StoreServ a Tier 2 solution due the requirement for node reboot during Inform Operating System upgrades. You present the HP 3PAR Persistence Port feature to the customer to address their concerns. (Refer to the exhibit.)

Which crucial characteristics are true about the HP 3PAR Persistence Port feature? (Select two)

• A.HP 3PAR Persistent Port requires a minimum to two paths per each World Wide Name (WWN) with additional 1:1 zones
• B.One a two node array, the HP 3PAR Persistence Port minimum setup requires each fabric switch to be physically connected equally to each in a node pair
• C.HP 3PAR Persistent Port requires additional failover zone for each node's guest World Wide Name (WWN)
• D.HP 3PAR Persistent Port will maintain connectivity during 3PAR mode upgrade or 3PAR node failure even with a single path host
• E.The host MPIO software must be reset to restarted after a failover scenario to restore the correct path balance