NCP-AII 무료 덤프문제 온라인 액세스

A company deploys a large language model training cluster containing multiple NVIDIA HGX servers. During benchmarking, GPUs within each server communicate efficiently, but gradient synchronization across servers introduces significantly higher latency than expected. The infrastructure engineer needs to identify the component primarily responsible for optimizing GPU- to-GPU communication between different servers while maintaining maximum bandwidth and minimum latency.

• A.NVIDIA InfiniBand fabric
• B.PCIe Gen5 switch
• C.NVIDIA NVSwitch
• D.NVIDIA MIG

A system administrator installed a new DPU on a system and needs to connect to the RHSIM interface using SSH for the first time. What IP address should the system administrator connect to?

• A.172.16.0.2/24
• B.10.0.0.1/24
• C.192.168.1.2/24
• D.192.168.100.2/24

A system administrator is virtualizing GPUs in VMware vSphere and needs to allocate a vGPU profile from the drop-down menu. There are several options available. What does "grid_a100-
20c" mean?

• A.This is a 20GB vGPU profile on NVIDIA A100.
• B.This is a NVIDIA A100 which allows VMs to be over-committed.
• C.This is a NVIDIA A100 which allows 20 Cores of compute to a VM
• D.This is a vGPU Profile on NVIDIA A100 where 20 VMs can use the GPU.

A financial institution deploys NVIDIA BlueField DPUs in a shared AI infrastructure where multiple business units use the same physical network. Security administrators want to isolate infrastructure services from tenant workloads while enforcing networking policies independently of the host operating system. Which BlueField capability best satisfies this requirement?

• A.Hardware acceleration for tensor operations during model training
• B.Infrastructure offload with isolated security and networking services on the DPU
• C.Dynamic expansion of GPU framebuffer memory
• D.Automatic GPU virtualization through CUDA

After Spectrum-X fabric deployment, NCCL tests show intermittent latency spikes. Which network condition most severely impacts East-West bandwidth?

• A.Packet loss >0.001% causing NCCL pipeline stalls.
• B.Jitter below 5us with consistent latency.
• C.400G port utilization at 70% on several nodes during tests.
• D.Multiple transceiver firmware mismatches.