E20-538 무료 덤프문제 온라인 액세스

File systems created for iSCSI LUNs should be large enough to accommodate which objects?

• A.iSCSI LUNs and snaps
• B.iSCSI LUNs
• C.iSCSI LUNs and NFS
• D.iSCSI LUNs and CIFS

How many Ethernet ports are allowed for EtherChannel?

• A.2, 3, or 4
• B.2, 4, or 8
• C.2, 4, 6, or 8
• D.3 or 5

Your company has bought two new Data Movers to be installed in a Celerra that is operating normally with server_2 as the primary and server_3 as the standby. The Data Movers have been installed and named as server_4 and server_5.
server_4 has been configured as the primary and server_5 as the standby. During the networking configuration of server_4 you realized that you can ping the Control Station and other interfaces in server_4, but you cannot ping neither your gateway nor any IP address outside of your Celerra.
You have used Unisphere to create the interface and you know you are using the correct IP address. server_2 is still operating normally and can ping the gateway and other workstations.
Which statement explains this behavior?

• A.A default network route has not been configured for server_4.
• B.The interface configured server_4 is unloaded.
• C.The interface configured in server_4 is down.
• D.The default network route of server_3 was not copied to server_4.

A network administrator needs to create a trunk on a Data Mover from dissimilar physical network devices.
What networking configuration should be used to accomplish this?

• A.SNMP
• B.EtherChannel
• C.LACP
• D.Fail Safe Network

Which iSCSI objects require secret passwords for two-way CHAP authentication?

• A.Target and initiator
• B.Target and source
• C.Client and target
• D.Agent and protocol server