DES-4122 무료 덤프문제 온라인 액세스

A technician working with a Dell EMC PowerEdge 1 take corrective action?

• A.Check the System Event Log
  Check PSU LED
  Do a virtual reseat of the iDRAC
• B.Check the LCC Log
  Check PSU LED
  Reseat the PSU
• C.Check the LCC Log
  Check PSU LED
  Reseat the CPU
• D.Check the System Event Log
  Check PSU LED
  Reseat the PSU

What is the drive characteristic of a BOSS M.2 drive in a Dell EMC PowerEdge server?

• A.Quad-level cell
• B.Single-level cell
• C.Write Intensive
• D.Read Intensive

Match each status LED indicator on the Dell EMC 14G PowerEdge server with its corresponding condition.

정답:

A technician is creating a virtual disk in the iDRAC (2x 4 TB NL-SAS in RAID 1) to install Windows 2016 They manually boot to the OS installation media without using the Lifecycle Controller OS Deployment wizard Only the first 2048 GB on the virtual disk can be partitioned How should the technician obtain access to the remaining 2 TB (approximately) of storage?

• A.Upgrade to a newer version of the operating system
• B.Use F2 to go into the BIOS, change the BIOS boot mode to UEFI, and try again
• C.Delete the 4 TB virtual disk and create a virtual (boot) disk no larger than 2048 GB
• D.Use the Lifecycle Controller OS Deployment Wizard to deploy the OS on this server

A company that has very specific firmware requirements has acquired Dell EMC PowerEdge servers Any replaced parts of the type must match the original parts identically. The procedure must be as simple as possible with minimal risk.
What action should a technician take to help accomplish this goal?

• A.Install and configure a repository manager
• B.Configure servers to access the remote firmware repository
• C.Enable the Collect System Inventory On Restart (CSIOR) attribute
• D.Enable the Match Firmware of Replaced Part setting in the system BIOS