D-PSC-MN-23 무료 덤프문제 온라인 액세스

A platform engineer has added an F200 node to a Dell PowerScale cluster. The cluster now has five F200 nodes.
Before leaving the site, what action must they perform?

• A.Reboot the node and wait for a green status
• B.Test for node connectivity and normal function
• C.Ensure the node LNN is set to 1
• D.SmartFail the node and rejoin to the cluster

What considerations should be made when applying upgrades or patches to a PowerScale cluster?

• A.Ensuring compatibility with existing applications
• B.Backing up configuration and data
• C.All of the above
• D.Verifying the integrity of the upgrade package

What critical steps should be performed to prepare a PowerScale node for operation after maintenance?

• A.Ensuring network connectivity
• B.Running system diagnostics
• C.Restoring the node configuration
• D.Verifying data integrity

When joining a new node to a cluster, why is reformatting or reimaging often required?

• A.To configure the node with the cluster-specific settings
• B.To update the node's firmware to the latest version
• C.To remove any residual data from previous deployments
• D.To ensure the node's OS is compatible with the cluster

A Dell PowerScale Gen 6 chassis is being installed. The chassis has been aligned with the rails.
What is the correct order of steps to finish the installation?

• A.1. Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack.
  2. Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.
  3. Secure the lift casters on the floor.
  4. Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.
  5. Push the node off the lift arms and into the rack.
• B.1. Push the node off the lift arms and into the rack.
  2. Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.
  3. Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack.
  4. Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.
  5. Secure the lift casters on the floor.
• C.1. Secure the lift casters on the floor.
  2. Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.
  3. Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.
  4. Push the node off the lift arms and into the rack.
  5. Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack.
• D.1. Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.
  2. Push the node off the lift arms and into the rack.
  3. Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack.
  4. Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.
  5. Secure the lift casters on the floor.