RF0-001 무료 덤프문제 온라인 액세스

Interrogation zones that are found to be interfering with an existing system can BEST be resolved by doing which of the following?

• A.Upgrading the RFID system to Electronic Product Code (EPC) Class 1 Gen 2 specifications.
• B.Replacing the existing components that are interfering.
• C.Turning off the RFID system.
• D.Shielding the zone with a reflective or absorptive material.

An interrogator that supports four antennas only has two antennas attached and the customer reports that the interrogator is not functioning. Which of the following may be the cause of the problem?

• A.Terminators were not placed on the unused antenna ports.
• B.The antennas were of different polarization.
• C.The antenna's gain was too high causing the interrogator to overheat.
• D.The interrogator must have four antennas connected to operate.

Cases are going to be tagged and stored in a humid, high temperature area. Which of the following types of labels would be needed?

• A.Direct thermal with gum adhesive.
• B.Paper with gum adhesive.
• C.Poly-coated with water base adhesive.
• D.Poly-coated with gum adhesive.

If a manufacturer ships items to the United States Department of Defense (DoD) and major retailers, which of the following standards applies to the use of RFID tags to identify the cartons and pallets they ship?

• A.EPCglobalInc.
• B.Universal Product Code (UPC)
• C.None, no standards exist
• D.International Organization for Standardization (ISO) 9001

Which of the following air interface standards would be applicable to the development of a passive system for the tagging of cases and pallets?

• A.International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 18000-6, Type C
• B.ISO/IEC 18000-3
• C.ISO/IEC 18000-7
• D.Electronic Product Code (EPC) Tag Data Standard 1.27