ISS-003 무료 덤프문제 온라인 액세스

Which of the following is the device that provides the cache when using SSD cache with Fastpath Premium Feature Key?

• A.RAID controller memory
• B.A writable DVD-ROM
• C.Solid state disks
• D.System memory

Your customer has a RMS25CB080 RAID card. The Array is a RAID 6 with 6 Seagate Barracuda hard drives. During normal operation one drive failed and no action was taken. Alerts were generated but ignored. At a later date a second drive failed. Which of the following is the BEST advice you can give your customer? (Select ALL that apply).

• A.Do nothing. The array is in degraded mode but still available.
• B.Customer should replace the drives and rebuild the array to restore redundancy.
• C.Ensure a regular backup policy is implemented.
• D.All data is lost and nothing can be recovered.
• E.The customer needs to change the RAID card.

The BMC System Event Log usually contains two types of information, Assertion and De-assertion. Assertion means an event is triggered andde-assertion means the status has recovered and the event has been withdrawn.

• A.True
• B.False

An Intel@ Server Specialist is building aserver for a customer who has specified that only Intel validated memory should be used. Where would the Specialist find a list of tested memory for currently shipping Intel Server Products? (Select ALL that apply).

• A.Product Brief
• B.Intel MemoryConfiguration Tool
• C.Price List Product Description
• D.Tested Hardware and Operating System List (THOL)
• E.Server Configurator Tool

A customer has a system based on an Intel@ Workstation Board W2600CR2, with 2 Intel@ Xeon@Processors E5-2650 v2 and 16x DDR3 ECC RDIMMs populated. The system is reporting memory failures on DIMM A1. Thecompany's Specialist swaps this DIMM with a known working one, and the error remains on DIMM slot A1. Next the Specialist replaces the processor and motherboard, and the error still persists on the same slot. Which of the following is the MOST likely causeof this error?

• A.There is an issue with the operating system.
• B.The power supply is supplying an incorrect voltage on the 1.5V line.
• C.The chassis has not been earthed properly.
• D.There is a motherboard standoff installed in the wrong position.