642-035 무료 덤프문제 온라인 액세스

A customer has Server1 working properly, configured to boot over SAN and with service profile SP1 assigned. This service profile is cloned to service profile SP2 and assigned to
Server2. Before Server2 boots, which three actions needs to be performed? (Choose three.)

• A.Change the IP address of the vNICs.
• B.Check the MAC address that is assigned to the vNICs on SP2.
• C.Add two vHBAs and assign them to the proper VSAN.
• D.Add the pWWN of SP2 to the zoning on the SAN switch.
• E.Change the boot target on SP2.
• F.Check the WWPN that is assigned to the vHBAs on SP2.

When using the Cisco UCS Manager GUI to troubleshoot a suspected bad memory, which logs contain data that are related to the faulty DIMM?

• A.the System Event log and Faults log that are located under the Admin tab
• B.the System Event log that is located under the Equipment tab and the Faults log that is located under the Admin tab
• C.the Events log and Faults log that are located under the Admin tab
• D.the System Event log that is located under the Server tab in the Navigation panel and the Faults log that is located under the Admin tab

Which piece of information does the FSM provide?

• A.the current task and status
• B.the last user to access the resource
• C.a collection of blade statistics
• D.a list of faults currently suppressed by the Cisco UCS Manager

You upgrade an operating system on a Cisco UCS C-Series Rack Server. After the upgrade, you discover that the performance of the server is much slower than expected. You verify that the operating system is on the Cisco support matrix for the rack server. Which two firmware types are the possible cause of the performance issue? (Choose two.)

• A.mptspi
• B.vSwitch
• C.vNIC
• D.fNIC
• E.eNIC

Which power policy should be chosen to maximize the performance of a Cisco UCS system with four PSUs and eight blades?

• A.non-redundant
• B.N+1
• C.grid
• D.performance