500-005 무료 덤프문제 온라인 액세스

The TX9000 center speaker connects to which component?

• A.TS1 codec
• B.center codec
• C.AV expansion box
• D.LCU

CORRECT TEXT
Using the following table, correctly identify the location of each component. Where is each component located?
Left Panel Center Panel Right Panel TS4 Codec A1: B1: TS2 Codec TS1 Codec A2: B2: C2: TS3 Codec

When the TX9000 boots up, green progress check marks are displayed on the screen. After successful bootup, six check marks are displayed. Which of these can cause the last check mark to fail?

• A.The TX9000 is experiencing a compact flash error.
• B.The TX9000 is experiencing network connectivity issues.
• C.The TX9000 cannot find its configuration and boots up the default configuration of a Cisco TelePresence System 500-32.?
• D.The TX9000 does not have a directory number assigned.
• E.The TX9000 was registered as an H.323 endpoint to Cisco Unified Communications Manager.?

After the initial bootup of a TX9000 system, you notice that the software version on the codec is not what was expected. Which location should be searched to ensure that the desired software is available on the TFTP server for the codec to download?

• A.Cisco Unified OS Administration-->Software-->Phones
• B.Cisco Unified Communications Manager-->Devices
• C.Cisco Unified Communications Manager-->Phones-->Software
• D.Cisco Unified OS Administration-->Firmware
• E.Cisco Unified Communications Manager-->TFTP File Management
• F.Cisco Unified OS Administration-->TFTP File Management

Which option allows the TX9000 to receive its configuration and software image from a TFTP server when a DHCP server is not available?

• A.Log into the local router and configure TFTP server access.
• B.Use the Cisco TelePresence Touch 12 to configure the TX9000 for TFTP server access.
• C.Log into the Cisco TelePresence Administration GUI, choose Unified CM Settings, choose Specify in the Use Configuration TFTP Servers entry, enter the IP address or addresses for Cisco Unified Communications Manager in the TFTP Server field(s), and click Apply.
• D.Log into Cisco Unified Communications Manager and configure the TX9000 from the device configuration web page.