350-801 무료 덤프문제 온라인 액세스

Drag and Drop Question
An engineer must configure a SIP integration between Cisco UCM and Cisco Unity Connection.
These components are configured already:
- SIP trunk security profile
- SIP profile
- SIP trunk
Drag and drop the components from the left into the order they must be configured on the right.

정답:

Refer to the exhibit. An engineer configures ISDN on a voice gateway. The provider confirms that the PRI is configured with 10 channels the engineer ordered and is working from the provider side, but the engineer cannot get a B-channel to carry voice. The rest of the configuration for the serial interface and voice network is functioning correctly. Which actions must be taken to carry voice?

• A.The engineer must activate the controller card on the voice gateway before configuring the device.
• B.The engineer must manually revert the order of using the channels.
• C.The engineer used a T1 interface but must use an E1 interface.
• D.The pri-group timeslots command must be 0-9 for the 10 channels because all values on a router start with 0.

Refer to the Exhibit. Which command is required to allow this media resource to handle Video Media streams?

• A.video codec h264
• B.codec pass-through
• C.maximum sessions hardware 50
• D.associate application Cisco Unified Border Element

A customer is deploying a SIP IOS gateway for a customer who requires that in-bond DTMF relay is first priority and out-of-band DTMF relay is second priority. Which IOS entry sets the required priority?

• A.dtmf-relay sip-kmpl cisco-rtp
• B.dtmf-relay cisco-rtp
• C.sip-notify dtmf-relay rtp-nte
• D.dtmf-relay rtp-nte sip-notify

An engineer is configuring LLQ in a network and completes the section for identifying different DSCP markings. Which part of the configuration specifies the traffic class for LLQ?

• A.class map
• B.policy map
• C.service policy
• D.access list