350-101 무료 덤프문제 온라인 액세스

Users report slowness on the network, and it is suspected that certain applications are consuming all the bandwidth. A network engineer must enable the NBAR protocol to improve wireless client traffic visibility and provide advanced, granular, application classification, and analytics. How should the network engineer configure NBAR on a 9800 WLC?

• A.Configure AVC on the policy profile.
• B.Enable deep packet inspection on the WLAN.
• C.Enable NBARv2 on the WLAN.
• D.Configure packet inspection on the policy profile.

A company deploys wireless networks in multiple countries. Why is configuring the correct AP regulatory domain critical?

• A.It enables QoS trust boundaries
• B.It changes CAPWAP encapsulation
• C.It determines DHCP relay behavior
• D.It controls permitted channels and transmit power levels

Refer to the exhibit. A network engineer is designing a Wi-Fi deployment for a high-density office environment. The engineer must select the appropriate channel plan to minimize co-channel interference (CCI) in the 2.4 GHz band. Which strategy is recommended to reduce CCI?

• A.Select only non-overlapping channels (1, 6, 11) for adjacent access points.
• B.Use all 11 channels with overlapping frequencies in a contiguous pattern.
• C.Assign channels randomly to avoid predictable patterns.
• D.Use a single channel for all access points to maintain consistency.

A university is deploying Cisco Catalyst 9176 APs at several satellite campuses, each with its own subnet and DNS services. The APs will be shipped with only their MAC addresses preregistered on the WLC. The satellite campuses do not use DHCP option 43, but they have access to a central DNS server. IT staff want APs to discover and join the Catalyst 9800 WLC automatically without site visits. Which solution must the IT staff implement?

• A.Create DNS entry cisco-capwap-controller.localdomain that resolves to the WLC management IP address.
• B.Assign static IP addresses to all 9176 APs and configure the controller to be the DNS server.
• C.Set up a multicast group on each different AP subnet to enable automatic controller discovery.
• D.Configure a DNS record ap-discovery with the controller virtual IP address.

Refer to the exhibit. An engineer configured a static IP address on a LWAPP, but it is not reachable for management. The engineer configured the wrong gateway and must now change the default gateway to 172.16.100.1. Which CLI command must the engineer use?

• A.capwap ap ip default-gateway 172.16.100.1
• B.capwap ap ip 172.16.100.104 255.255.255.0 172.16.100.1
• C.capwap ap ip 172.16.100.104 255.255.255.192 172.16.100.1
• D.capwap ap controller ip address 172.16.100.1