300-915 무료 덤프문제 온라인 액세스

Refer to the exhibit.

When a laptop is connected to a device via a serial connection, which action makes the output readable?

• A.Change the baudrate in the connection settings.
• B.Change the power level of the device.
• C.Change the unicode settings to UTF-8.
• D.Reboot the device in case a firmware error is the issue.

The environment for an Industrial IoT project in a large open pit mine is being scoped. The location has a large amount of dust and the device will be exposed to less than 1 meter of water temporarily.
When the edge device is being chosen, which Ingress protection rating must be used?

• A.IP67
• B.IP37
• C.IP61
• D.IP76

Which connector is southbound?

• A.device connector
• B.horizontal connector
• C.universal connector
• D.cloud connector

When an RS232 device is connected to a Cisco IR829 router, the data collected is not being parsed correctly by the edge application.
Which two steps should be taken to troubleshoot the issue? (Choose two.)

• A.Set the cable connections based on the PIN layout from the sensor vendor.
• B.Serial cable length should not exceed 1.5 meters.
• C.Ensure that communication parameters like baud rate and parity are set correctly.
• D.Communication mode must be set to half duplex over serial connection.
• E.SSH access on the Cisco IR829 router must be enabled for IOx Guest OS.

Which two statements define the mechanism for console access of the Guest Operating System from the Cisco IR829 router? (Choose two.)

• A.The Guest OS can be accessed directly using the console port on the Cisco IR829 router.
• B.The Guest OS console is available directly by the AUX port 3362 from the Cisco IR829 router.
• C.The Guest OS can be accessed by initiating SSH from the Cisco IR829 console.
• D.The Guest OS console is available only when a static IP is configured on the host.
• E.The Guest OS can be accessed by default on Telnet port 2070 from the Cisco IR829 console.