300-360 무료 덤프문제 온라인 액세스

You are designing a WLAN by using the capacity planner in Ekahau Site Survey. What is the maximum Peak Hour Usage setting that you can configure?

• A.6x
• B.2x
• C.12x
• D.8x

A wireless consultant is deploying an outdoor mesh network. Which two factors must be considered? (Choose two.)

• A.network connectivity
• B.traffic lights
• C.mounting
• D.satellite dishes
• E.buildings

A customer has determined that aesthetics is a primary concern for their upcoming guest deployment. Which design consideration can be lever address this concern?

• A.Use AIR-AP-BRACKET -1 to allow for greater mounting locations
• B.Paint the access point to cover the LED from being noticeable
• C.Deploy environmentally friendly cabling components to blend into the environment
• D.Use enclosures to hide the wireless infrastructure in the surrounding environment

you have a customer that is building a new campus of four 3 story buildings that you have just completed that site survey for. the customer is interested in the amount of rack space they will need to allocate in either the building MDF or in the data center of controllers. Each building is going to require 75 APs to support voice and data. How should the controllers be deployed to provide the least number of controllers. the highest redundancy and the easiest management?

• A.Use the centralized deployment method in the data center with the 1 :1 redundancy method and client SSO
• B.Use the centralized deployment method in the data center with the N+ 1 redundancy method.
• C.Use the distributed deployment method in each building MDF with the N+N+ 1 redundancy method and Client SSO.
• D.Use the distributed deployment method in each building MDF with the N+ N redundancy method.

A hospital environment was designed to guarantee RF coverage at or better than67 dBm in the 5GHz spectrum. Thecustomer mandates the RRM used for DCA and TPC in both bands. After deployment, why do many of the leagacy 802.11 b/g devices have difficulty maintaining connectivity?

• A.Excessive co-channel interference in the 2.4 GHz band exists
• B.TPC drastically increases Tx power in the 2.4 GHz band
• C.Excessive overlapping channels in the 2.4 GHz band exists
• D.TPC drastically reducesTx power in the 2.4 Ghz band