300-170 무료 덤프문제 온라인 액세스

What is a functional difference between IKEv1 and IKEv2 on a router?

• A.RRI
• B.HSRP
• C.DPD
• D.Stateful Failover

You have a network that has three subnets. You migrate the network to a Cisco ACI fabric. You want to bridge the three subnets without changing the IP addresses of the endpoints. The default gateway for the endpoints does not sit on the ACI fabric. Which action must you take to keep the three subnets in a single flood domain?

• A.Create multiple bridge domains that have unicast routing enabled within the same EPG. Create corresponding subnets inside the bridge domains and connect the existing network to the bridge domains.
• B.Create one bridge domain that has unicast routing disabled and connect the existing subnets to the bridge domain.
• C.Create multiple bridge domains that have unicast routing disabled within the same EPG. Connect the existing subnets to the bridge domains.
• D.Create one bridge domain that has unicast routing enabled and create corresponding subnets inside the bridge domain. Connect the existing network to the bridge domain.

Which action occurs first when a device that has the POAP feature boots and cannot find the startup configuration?

• A.The device installs a software image and a configuration file.
• B.The device locates a DHCP server.
• C.The device enters POAP mode.
• D.The device obtains the IP address of a TFTP server.

Which description of route leaking between VRFs is true?

• A.By default, the maximum number of IP prefixes that can be imported from the default VRF to a nondefault VRF is 500.
• B.You can restrict route leaking to specific routes by using a VASI interfaces.
• C.VRF route leaking requires an Enterprise license.
• D.Route leaking is supported only between the default VRF and a nondefault VRF.

Which situation causes POAP to auto-provision a switch?

• A.The startup configuration is corrupt.
• B.The switch is powered on after being offline for more than 48 hours.
• C.The startup configuration is missing.
• D.The startup configuration is corrupt, and you manually rebooted the switch.