156-215-71 무료 덤프문제 온라인 액세스

How many packets are required for IKE Phase 2?

• A.2
• B.6
• C.12
• D.3

Identify the correct step performed by SmartUpdate to upgrade a remote Security Gateway. After selecting Packages / Distribute Only and choosing the target Gateway, the:

• A.SmartUpdate wizard walks the Administrator through a distributed installation.
• B.selected package is copied from the Package Repository on the Security Management Server to the Security Gateway and the installation IS performed.
• C.selected package is copied from the CD-ROM of the SmartUpdate PC directly to the Security Gateway and the installation IS performed.
• D.selected package is copied from the Package Repository on the Security Management Server to the Security Gateway but the installation IS NOT performed.

Which R71 SmartConsole tool would you use to verify the installed Security Policy name on a Security Gateway?

• A.None, SmartConsole applications only communicate with the Security Management Server.
• B.SmartView Server
• C.SmartUpdate
• D.SmartView Tracker

When Jon first installed the system, he forgot to configure DNS servers on his Security Gateway. How could Jon configure DNS servers now that his Security Gateway is in production?

• A.Login to the firewall using SSH and run sysconfig, then select Domain Name Servers.
• B.Login to the firewall using SSH and run cpconfig, then select Domain Name Servers.
• C.Login to the firewall using SSH and run fwm, then select System Configuration and Domain Name Servers.
• D.Login to the SmartDashboard, edit the firewall Gateway object, select the tab Interfaces, then Domain Name Servers.

When using SecurePlatform, it might be necessary to temporarily change the MAC address of the interface eth 0 to 00:0C:29:12:34:56. After restarting the network the old MAC address should be active. How do you configure this change?

• A.As expert user, issue the command: # IP link set eth0 addr 00:0C:29:12:34:56
• B.Open the WebUI, select Network > Connections > eth0. Place the new MAC address in the field Physical Address, and press Apply to save the settings.
• C.Edit the file /etc/sysconfig/netconf.c and put the new MAC address in the field (conf : (conns
  :( conn :hwaddr ("00:0C:29:12:34:56")
• D.As expert user, issue these commands: # IP link set eth0 down # IP link set eth0 addr 00:0C:29:12:34:56 # IP link set eth0 up