ANVE 무료 덤프문제 온라인 액세스

If image clarity changes are made within the camera web interface, but are not reflected within a Video Management Software (VMS), what is the most likely cause of the camera not accepting the settings?

• A.The camera is faulty and needs to be replaced
• B.The VMS is overwriting the changes in the camera
• C.The user does not have administrative rights to change the settings
• D.The camera's advanced settings need to be changed first

With Axis Sharpdome technology,

• A.focus is maintained between PTZ positions.
• B.a PTZ camera can see above its horizon.
• C.wipers keep the dome cleaner and dryer.
• D.the thicker glass makes the camera robust.

In an Ethernet network, broadcast traffic is received and processed by

• A.Only those devices that have registered with the server to receive the traffic, making it suitable for network video since the network load would be kept reasonable.
• B.All devices on the network, making it suitable for network video since any device can access the video without any overhead from establishing a separate connection to the server.
• C.Only those devices that have registered with the server to receive the traffic, making it unsuitable for network video, due to the overhead from establishing a separate connection to the server.
• D.All devices on the network, making it unsuitable for network video since the network load would be unacceptable.

A camera without an onboard SFP slot is installed 2 km (1.24 miles) away from the switch, using a fiber connection. To power the camera through PoE, and to transmit data, what is required?

• A.Midspan with SFP slot
• B.Splitter
• C.Media converter
• D.PoE extender

An installer wants to be sure that the AXIS P3347 always delivers full frame rate (30 fps) even in darker conditions. Which of the following options should be used?

• A.Set the capture mode to 3 megapixel
• B.Set the Group of Video (GOV) length to 30
• C.Set maximum shutter time to 1/30 s
• D.Set priority to frame rate