7003-1 무료 덤프문제 온라인 액세스

A technician on a Communication Server 1000E SA Rls. 7x cannot get a second media Gateway to register with the Call Server. The call server and Media Gateway 1 sit in the same 19 inch rack while Media Gateway 2 is in another building and connected via the computer IP network Media Gateway 2 can ping the Call Server but cannot register. The network is suspected of having a firewall or port blocking issue.
Which diagnostic tool will help to isolate and identify a firewall or port blocking issue between the call server and Media Gateway 2?

• A.Linux PPP Tool
• B.Linux Modem Configuration Tool
• C.Packet Capture Tool
• D.Gryphon Tool

A customer with an existing Option 11C Rls. 5.5 chassis system plans to upgrade to a Communication Server (CS) 1000E Rls. 7x Standard Availability with a single IP Media Gateway (MG) 1000E chassis.
To complete the upgrade, which component in the Option 11C must be replaced?

• A.SSC Card
• B.Call Processor
• C.Media Gateway
• D.Digital Line Card

A field calls about a problem enabling the DSPs on a new Communication Server (CS) 1000E SA Co-resident on release 7x. The DSPs on the MG 1 are all enabled but enabling the DSPs on MG2 and MG3 fail, and asked that the configuration be reviewed.
MG1: CPMG 128
MG2: MGC 128 DSP DB in position 2
MG3: MGC 128 DSP DB in position 2
After reviewing the configuration, an error in the DSP 128 VGW (DSP) configuration is identified?
Which configuration option accurately reflects the proper configuration for the voice Gateway (DSP) channel?

• A.Numbering of VGW channels: 128 Trunk data block VGW Terminal number: 004 0 01 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00
• B.Numbering of VGW channels: 128 Trunk data block VGW Terminal number: 004 0 00 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00
• C.Numbering of VGW channels: 128 Trunk data block VGW Terminal number: 004 0 02 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00
• D.Numbering of VGW channels: 128 Trunk data block VGW Terminal number: 004 0 11 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00

A customer wants to build a new Ip node on their Communication Server (CS) 1000E system with three Signaling Servers. This node will support virtual trunks, IP media services, TPS and personnel directories. A technician logs into Elements manager to complete the configuration, after creating and saving the node configuration, the transfer now option chosen, then the servers are selected, the start sync is selected followed by restart application.
What is expected outcome from the system?

• A.The node file will be transferred from Signaling Servers to the call servers, and INI files will be transferred from the call server to the selected servers.
• B.The node will be transferred from Element manager to the call server, and INI files will be transferred from Element manager to Call Server.
• C.The node file will be transferred from Signaling Servers to the Call Server, and the INI files will be transferred from Call Servers to the Signaling servers.
• D.The node file will be transferred from Call Servers to the Signaling servers, and the INI files will be transferred from the Call Servers to the selected servers.

A customer is preparing to install software on the CPMG server and would like to display the boot sequence on the system terminal for the BIOS, BOOT ROM, and operating System.
Which port on the CPMG server provides this information?

• A.Frontface embedded LAN (ELAN) port 0
• B.Frontface TTY port 2
• C.Frontface TTY PORT 1
• D.Backplane 3-port connection TTY port 0