Solution:
[root@node1 ~]# vim /etc/yum.repos.d/rhcsa.repo
[Base]
name=Base
baseurl=http://content/rhel9.0/x86_64/dvd/BaseOS
enabled=1
gpgcheck=no
[App]
name=App
baseurl=http://content/rhel9.0/x86_64/dvd/AppStream
enabled=1
gpgcheck=no
# Verification
[root@node1 ~]# yum repoinfo
[root@node1 ~]# yum -y install vsftpd

rpm -ivh kernel-firm...
rpm -ivh kernel...

vi /etc/sysconfig/network GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0 DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
service network restart
Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254.

mkdir/root/findfiles
find / -user jack -exec cp -a {} /root/findfiles/ \; ls /root/findresults

The LVM system organizes hard disks into Logical Volume (LV) groups. Essentially, physical hard disk partitions (or possibly RAID arrays) are set up in a bunch of equal sized chunks known as Physical Extents (PE). As there are several other concepts associated with the LVM system, let's start with some basic definitions:
Physical Volume (PV) is the standard partition that you add to the LVM mix. Normally, a physical volume is a standard primary or logical partition. It can also be a RAID array.
Physical Extent (PE) is a chunk of disk space. Every PV is divided into a number of equal sized PEs. Every PE in a LV group is the same size. Different LV groups can have different sized PEs.
Logical Extent (LE) is also a chunk of disk space. Every LE is mapped to a specific PE.
Logical Volume (LV) is composed of a group of LEs. You can mount a file system such as /home and /var on an LV.
Volume Group (VG) is composed of a group of LVs. It is the organizational group for LVM. Most of the commands that you'll use apply to a specific VG.
Verify the size of Logical Volume: lvdisplay /dev/vg0/lv1
Verify the Size on mounted directory: df -h or df -h mounted directory name Use: lvextend -L+400M /dev/vg0/lv1 ext2online -d /dev/vg0/lv1 to bring extended size online.
Again Verify using lvdisplay and df -h command.