A. The IES must use an IP address that is different than the CE.

B. The IES must include a network port.

C. The IES can only include one SAP for the CE.

D. The IES's interface must be an IGP peer with the CE.

A. Enable MPLS and RSVP on all routers along the LSP path.

B. Enable CSPF on the head-end router.

C. Enable traffic engineering on all routers along the LSP path.

D. Configure a path definition on all routers along the LSP path.

A. "65100"

B. "65100.+"

C. ".* 65100.*"

D. ".+ 65100"

A. With the same method and attribute as 16-bit AS numbers.

B. Aggregation is not yet supported with 32-bit AS numbers.

C. With the same method as 16-bit AS numbers, but using the AS4_Aggregator attribute.

D. By using a dummy value of 23456 in the 16-bit AS aggregator field. This value lets the router know it needs to read the 32-bit AS number that is contained in the nextTLV.

A. All BGP routes are accepted.

B. BGP routes matching prefix lists "List-1" or "List-2" are rejected.

C. All routes matching prefix lists "List-1" and "List-2" are rejected.

D. BGP routes matching prefix lists "List-1" and "List-2" are rejected.