GB0-381-ENU 문제 186
Two MSR routers MSR-1 and MSR-2 are interconnected through the 172.16.16.0/20 network segment. Now it is necessary to configure the OSPF protocol on the router MSR-1 to establish the adjacency relationship with MSR-2 normally. Which of the following configurations is not feasible? (Choose one or more) (Choose one or more)
GB0-381-ENU 문제 187
그림에 표시된 토폴로지에서 RTA에서 다음 명령을 실행합니다.
RTA-ospf-1] 기본 경로 광고
기본 경로는 RTC 라우터의 라우팅 테이블에서 관찰할 수 없습니다. 불가능한 이유는 ______
RTA-ospf-1] 기본 경로 광고
기본 경로는 RTC 라우터의 라우팅 테이블에서 관찰할 수 없습니다. 불가능한 이유는 ______
GB0-381-ENU 문제 188
관리자는 MSR 라우터에서 OSPF 경로 우선 순위 값을 60으로 구성하려고 합니다. 다음 명령 중 옳은 것은?
GB0-381-ENU 문제 189
There are 4 routes 10.0.0.0/24, 10.0.1.0/24, 10.0.2.0/24, and 10.0.3.0/24 in the routing table.
For route aggregation, the correct route after aggregation is _________.
For route aggregation, the correct route after aggregation is _________.
GB0-381-ENU 문제 190
In the network as shown in the figure, the correct IP addresses have been configured on RTA, RTB and RTC.
Execute the following commands on the three routers RTA, RTB and RTC:
RTA-Serial5/0] ospf dr-priorit100
RTA] ospf 1 router-id 1.1.1.1
RTA-ospf-1] area 0
RTA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
RTB] ospf 1 router-id 2.2.2.2RTB-ospf-1] area 0
RTB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
RTC] ospf 1 router-id 3.3.3.3 RTC-ospf-1] area 0
RTC-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
Judging from the above configuration, ________
Execute the following commands on the three routers RTA, RTB and RTC:
RTA-Serial5/0] ospf dr-priorit100
RTA] ospf 1 router-id 1.1.1.1
RTA-ospf-1] area 0
RTA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
RTB] ospf 1 router-id 2.2.2.2RTB-ospf-1] area 0
RTB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
RTC] ospf 1 router-id 3.3.3.3 RTC-ospf-1] area 0
RTC-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
Judging from the above configuration, ________