Explanation:
Cisco CCNA 200-301 v1.1 Network Fundamentals questions of this type test whether each item is matched to the technology that actually performs that role. The reliable method is to classify each term by operating layer, packet behavior, management function, or security purpose before matching it. Several terms in these items are legitimate Cisco networking concepts, but they become wrong when assigned to the wrong protocol or plane. The mapping retained in the document follows that separation: transport behavior is matched to TCP or UDP, wireless or security terms are matched to their mechanisms, and automation items are matched to the correct API or management model. This matters operationally because troubleshooting fails quickly when a forwarding-plane function is treated as a management-plane feature or when a security control is applied to the wrong threat. The shown mapping is therefore retained as the verified response.

See the Explanation for the solution.
Explanation:
To subnet 172.25.0.0/16 to meet the subnet requirements and maximize the number of hosts, you need to determine how many bits you need to borrow from the host portion of the address to create enough subnets for 32 sites. Since 32 is 2^5, you need to borrow 5 bits, which means your new subnet mask will be /21 or
255.255.248.0. To find the second subnet, you need to add the value of the fifth bit (32) to the third octet of the network address (0), which gives you 172.25.32.0/21 as the second subnet. The first usable IP address in this subnet is 172.25.32.1, and the last usable IP address is 172.25.39.254.
To assign the first usable IP address to e0/0 on Sw101, you need to enter the following commands on the device console:
Sw101#configure terminal Sw101(config)#interface e0/0 Sw101(config-if)#ip address 172.25.32.1
255.255.248.0 Sw101(config-if)#no shutdown Sw101(config-if)#end
To assign the last usable IP address to e0/0 on Sw102, you need to enter the following commands on the device console:
Sw102#configure terminal Sw102(config)#interface e0/0 Sw102(config-if)#ip address 172.25.39.254
255.255.248.0 Sw102(config-if)#no shutdown Sw102(config-if)#end
To subnet an IPv6 GUA to meet the subnet requirements and maximize the number of hosts, you need to determine how many bits you need to borrow from the interface identifier portion of the address to create enough subnets for 32 sites. Since 32 is 2^5, you need to borrow 5 bits, which means your new prefix length will be /69 or ffff:ffff:ffff:fff8::/69 (assuming that your IPv6 GUA has a /64 prefix by default). To find the second subnet, you need to add the value of the fifth bit (32) to the fourth hextet of the network address (0000), which gives you xxxx:xxxx:xxxx:0020::/69 as the second subnet (where xxxx:xxxx:xxxx is your IPv6 GUA prefix). The first and last IPv6 addresses in this subnet are xxxx:xxxx:xxxx:0020::1 and xxxx:xxxx:
xxxx:0027:ffff:ffff:ffff:fffe respectively.
To assign an IPv6 GUA using a unique 64-bit interface identifier on e0/0 on Sw101, you need to enter the following commands on the device console (assuming that your IPv6 GUA prefix is 2001:db8::/64):
Sw101#configure terminal Sw101(config)#interface e0/0 Sw101(config-if)#ipv6 address 2001:db8::20::1/69 Sw101(config-if)#no shutdown Sw101(config-if)#end To assign an IPv6 GUA using a unique 64-bit interface identifier on e0/0 on Sw102, you need to enter the following commands on the device console (assuming that your IPv6 GUA prefix is 2001:db8::/64):
Sw102#configure terminal Sw102(config)#interface e0/0 Sw102(config-if)#ipv6 address 2001:db8::27::fffe
/69 Sw102(config-if)#no shutdown Sw102(config-if)#end

Explanation:
Cisco CCNA 200-301 v1.1 expects these items to be matched by function, protocol layer, scope, and operational role rather than by keyword similarity. The reliable method is to identify what each item actually does in a Cisco network: whether it forwards traffic, manages a device, secures access, assigns addressing, identifies a resource, or carries control information. Distractors in this format are usually valid networking terms placed under the wrong category. That is why the retained mapping is important; it keeps protocol behavior, device function, and service purpose aligned. In a real network, mixing these concepts leads to broken routing, failed wireless access, insecure management, or automation calls aimed at the wrong interface. The mapping shown in the document is therefore retained as the Cisco-consistent answer for this item.

Option D. Routing questions are solved by applying longest-prefix match, administrative distance, metric, and protocol-specific behavior in the correct order. Cisco CCNA 200-301 v1.1 includes this under IP Connectivity, where the expected skill is to identify the feature that actually creates the observed behavior or meets the configuration goal. The wording usually contains the decisive clue: a prefix length, a VLAN role, a protocol version, a wireless security standard, or a management-plane function. Wrong answers either use the wrong prefix, the wrong next hop, or a route source that would not be preferred. In an operational network, choosing the wrong option would typically cause failed connectivity, insecure management, poor wireless behavior, or incorrect forwarding. The selected answer matches the Cisco configuration model and is retained as the verified answer.

It is used directly by an individual user to access network services. Security questions require distinguishing authentication, authorization, encryption, secure management, malware protection, and physical controls.
Cisco CCNA 200-301 v1.1 includes this under Network Fundamentals, where the expected skill is to identify the feature that actually creates the observed behavior or meets the configuration goal. The wording usually contains the decisive clue: a prefix length, a VLAN role, a protocol version, a wireless security standard, or a management-plane function. The wrong options apply the right security vocabulary to the wrong control or use weaker/deprecated protection. In an operational network, choosing the wrong option would typically cause failed connectivity, insecure management, poor wireless behavior, or incorrect forwarding. The selected answer matches the Cisco configuration model and is retained as the verified answer.